How to use

How to prepare Raypath cloths for first use

All home care wipes (except the pink one) need to be activated before first use. It is recommended to wash them several times by hand in cool water or once in a washing machine at 60°C, 800 rpm, without fabric softener.

Use

Wet cleaning wipe must be wet during use (it is not enough to just moisten it). The dirtier the surface, that wipe should be wetter. Wet it with plain cool with water. 

Cleaning wipes cannot be pressed because it loses its strength when pressed efficiency - the hair no longer collects dirt. So, we clean in gentle circular motions.

We use the pink dry cleaning cloth dry - it no need to moisturize.

Cloth care

The cloths can be hand washed in cool water with Raypath Nanosilver soap or any other with detergents that do not contain fabric softeners softeners.

After washing, wipes are recommended rinse in clean water to remove detergent residues would be removed from the fiber.

Wipes can be (and are recommended to be) used as often as possible. more often) wash in the washing machine (can also be combined with other laundry). It is important to remember:

1. Temperature up to 60 C.
2. Up to 800 rpm.
3. Do not use fabric softener.

The pink cloth can be simply shaken out after use or to suck. When it gets very dirty, it can be washed. according to the same recommendations as other cloths. Only when washing the pink cloth, it is recommended to put it in 

washing bag.

Attention:

• Do not leave dirty cloths to dry after use – it is necessary to wash them or at least leave them in water.

• The fibers of the cloth do not tolerate heat. Therefore, they cannot be dry them in an automatic dryer, direct in sunlight or directly on a hot radiator. 

• Do not use fabric softeners when washing.

 

A short video on cloth activation and care


 

Have questions? Visit the frequently asked questions section by clicking here.